Gadgets
New Phonebook Backup Pal -One Touch Assistant
by babikenshop on Sep.08, 2010, under Gadgets
Maybe you had experiences like your phone stolen, or damaged unexpectedly but you did not have a backup for your important phone books.
There were some products which you could back up your phone books like using something like a card reader or a special complicated device to do the job. But we got a new and easier idea to do the backup job for you.
Officially we call our device as “One Touch Assistant”. This device is attached to your charger and when you charge your phone, it backups your phonebooks. It is very easy and you will never forget it as you have to attach it to your phone charger. Another thing is that the One Touch Assistant can support a very wide range of phones. ( compatible lists)
Youbue videos about it : http://www.youtube.com/watch?v=DkTdBW1XEag
To have an idea of the the whole, you could check below user manual for it.
How to use
User Manual for One Touch
Assistant
Instruction - Connect ：
Instruction - Backup：
After connect with cell phone and plug into USB Charger, both green and blue light will stay lighted. When One Touch Assistant detected phone, two lights will both blink slowly six times for waiting confirmation. If no button pushed, One Touch Assistant will start to back up data from phone. During back up, green light will keep blinking. After the backup is completed, green light will remain on and One Touch Assistant will charger phone until battery is fully charged.
Note:
a) The speed of data backup is related to the data transfer rate of the cell phone, and the length of the contact list on your cell phone and SIM card. Hence, different cell phones can take different lengths of time to complete the backup. Usually, under normal conditions, the process takes a few minutes.
b) One Touch Assistant can only back up data when the phone is turned on.
c) If the green light stays light forever, please reconnect or update One Touch Assistant.
d) If you need to use the phone and wish to disconnect One Touch Assistant from your cell phone, you may do so at any time. However, you have to follow the above steps to restart the back-up process.
e) One Touch Assistant can store 1500-3000 contacts, the actual number depend on length of contact. Please don’t copy other files into One Touch Assistant and be careful of computer virus, which might cause error.
Instruction - Restoration：
Connect ：
Restoration：
One Touch Assistant can restore data to cell phone. When you restore data, One Touch Assistant will compare your contacts in your cell phone with the one on One Touch Assistant. Contacts in One Touch Assistant that do not exist in your phone will be added to the phone. It is relatively safe because it only adds data to the phone and does not erase any data. The process takes longer time.
After connect with cell phone and plug into USB Charger, green light and blue light will stay lighted. When One Touch Assistant detected phone, two lights will both blink slowly six times for waiting confirmation. At this time, press button and wait until green light turns off and blue light lights, then release button, blue light will blink. One Touch Assistant starts to restore data in incremental restore mode and charge phone at same time.
After the incremental restoration process is completed, blue light will remain on and One Touch Assistant will charger phone until battery is fully charged.
Please ensure that there is enough space in your cell phone before you start the restoration process. That’s because some cell phones have limited contact storage capacity, which will make it impossible to add new contact to your cell phone if there is not enough space for it.
Note
Instruction - Edit：
Plug One Touch Assistant into the USB port of PCs or laptop. After a few
seconds：
1、
Double click
“My
Computer”;
2、
One Touch Assistant will be recognized on the PC as a removable disk named
“BACUP”.
Under the root directory of the removable disk, there are three files listed
as “SIM1”,
“SIM2”
and “PHONE”.
These documents record the contact information from the SIM card and the
phone separately.
3、
“SIM1.txt”,
“SIM2.txt”
and “PHONE.txt”
can be deleted to protect personal privacy.
!!After
deletion, recovery procedure can NOT be executed until backup operation
completed!
!!For
privacy protection, One Touch Assistant is recommended to be used by only
one person. Before you lend it to other people, make sure your personal data
is already cleared.
Instruction -
Check & Manage：
View and Manage Contacts
Check:
Plug “One
Touch Assistant”
into the USB port of your computer and after a few seconds it will be
recognized on the computer as a removable disk named
“BACUP”.
Under the root directory of the removable disk, there are three documents
listed as SIM1.TXT, SIM2.TXT and PHONE.TXT. These documents record the
contact information from the SIM card and the phone separately.
If you want change your contacts into other format or use contacts in other
software, we recommend create new Excel document. Choose Data→Import
external data→Import
data, choose your contacts document, and then you can save as any Excel
supported format.
Instruction
-
FAQ：
■
Dose My phone could use the One Touch Assistant?
A: In the product packaging of One Touch Assistant, we will attach phone
support list of One Touch Assistant. It covers all mobile phones that One
Touch Assistant can support. IF you want to know the latest mobile phone
models which can be supported, please contact us .
■
I don’t
know my cell phone’s
model?
A: Mobile phone models are reflected in the network permit, and the network
permit was always posted around the SIM card.
■
If disconnect connectivity with One Touch Assistant in case that my phone
has not been completed backup, would I have no all the data inside?
A: Please do not disconnected with One Touch Assistant when back up or
restore, if it is disconnected, data inside also will not disappear. When
you are backing up, the amount of backed up data will depend on the time
backing up. That is, the longer time your back up, the more data have backed
up when disconnected during backing up. But please try to disconnect after
the One Touch Assistant backup is completed.
■
How do I know my One Touch Assistant has been backed up well, or have
completed restore?
A: If backup is completed it will show a long green light, If restore is
completed it will show a long blue light. If it is backing up it will show
green light flashes, if it is restoring it will show blue light flashing.
■
How can I remove numbers in One Touch Assistant?
A: You only need to connect our One Touch Assistant to the computer, search
for the moved disk BACUP in my computer, then right click the mouse, select
Format, then click OK. After formatting, please disconnect One Touch
Assistant with computer, then connect again, check there is no numbers in
phone TXT file of BACUP.
■
Each charger’s
output voltage of the different phone models, especially the output current
will be some differences, is there an impact on the mobile phone when use
the One Touch Assistant?
A: No affecting. We control current within the security current framework.
And don’t
worry about the voltage, the VBUS charge model we used is the same with the
computer exactly.
■
Is it need to install the corresponding software when read the address book
through your computer?
A: No need to install any drivers and software, the address book in One
Touch Assistant is read as a TXT format through computer.
■
Now mobile phones are not the same format, do One Touch Assistant can still
restore?
A: Yes. Restore is our technological advantage. The advantage of our
products is a One Touch Assistant will be able to back up numerous of mobile
phones, and can restore. And it separated mobile phones and SIM cards when
restore. Originally it is on phone, it is also on phone after restored.
